Rebuild Your Transfer Case for a Smooth Driving Experience

Do you know what helps your 4WD(four-wheel-drive) vehicle gain traction on slippery roads or gives you enough torque to crawl over rock at slow speeds? The transfer case is mainly responsible for this. So what is a transfer case? Transfer case, sometimes called T boxes, is found in four-wheel-drive vehicles to distribute power to all four wheels. Without transfer cases, off-road driving would be much more difficult.

The transfer case of the car is next to the transmission. The engine powers the transmission, and that power is then sent to the transfer case. By transferring power from the output shaft through a chain or a set of gears, torque is transmitted to the front and rear thrust shafts, providing power to the axles.

What’s the use of a Transfer Case in a Car?

The majority of cars nowadays sports front-wheel drive. However, your vehicle requires a transfer case to transfer the power to the rear wheels. The prop shaft is connected to the car engine and the rear wheels of your automobile. Part of the car provides the best traction when driving on slippery surfaces when driving off the road or on steep slopes. If we speak in a layman’s language, a transfer case will split the engine power and send it to the front and rear shaft.

Types of Transfer Cases?

Many types of transfer cases are used in four-wheel-drive vehicles. Some of them are separate parts. In contrast, others are integrated into the transmission design of the car. Some transfer cases have to be changed by hand. Simultaneously, others are moved or altered electronically without any effort on the part of the driver.

Why should you get your Transfer Case Repaired?

The use and importance of a transfer case in every vehicle are fundamental. But since all torques to the wheels have to go through the transfer case, the problem with a transfer case can be very similar to a transmission failure. It can ultimately interfere with the movement of the vehicle. During a rebuild service, your transmission is inspected, and any worn or faulty parts get replaced while the working parts are kept intact.

  • New and Rebuilt Transfer Case: A rebuilt transmission is an economical option compared to buying and installing a new transfer case. You can keep your vehicle operational with updated transmission parts.
  • Used and rebuilt transfer case: When examining the rebuilt transfer cases, consider the parts’ mileage and current condition. You know all the defective components have been replaced with a remanufactured transfer case.

Whatever transfer case is currently installed in your car, it must always be in good condition. If Any problem arises and you are unsure whether it is a transmission or a transfer case problem, relax and get it checked by a knowledgeable technician. Otherwise, there is a possibility that you can severely damage your transfer case or the transmission and other parts nearby. Fortunately, it is possible to avoid the financial burden of an expensive replacement. You can rebuild the existing transfer case of your vehicle instead of looking to buy a new one. So don’t wait and get rebuilt transfer cases for your cars.